1983 D150 / Slant Six the story Continues

There was a clutch issue, the finger height adjusting bolts on this B&B clutch were improperly staked, I did not know that then, but I know it now, causing real shifting difficulties as the engine warmed.
I did know there was a clutch issue, so I was going to pull the motor. With it out I decided to do a cam swap and a general clean up on the motor and engine compartment.
With the motor out, did a rebuild of the cylinder head, valves cleaned, re lapped, new valve seals

D150 Valves.jpg

D150 windage tray.jpg