Timing with MS2

There is lots of documentation on MS but I have not kept up. You really need to do some research over at the DIY Megasquirt pages. One big thing you need to realize is that the electronics in the MS can be adjusted to delay the spark from the trigger. So the trigger point is not that important. What you can NOT adjust electronically..........is where the rotor is. So running, regardless of where spark event happens, the rotor must be aligned with the proper plug tower in the cap "Rotor phasing" Last I knew you could trigger MS with just about anything, from breaker points to breakerless dist to crank trigger.

"Somewhere" there is a manual you can download on the site