[FOR SALE] 340 engine parts

-
Status
Not open for further replies.

Stroked408

FABO Gold Member
FABO Gold Member
Joined
Oct 3, 2007
Messages
209
Reaction score
169
Location
Bay Area California
Rating - 100%
3   0   0
Contact seller
I have this ad posted on Craigslist in the SF Bay Area California. I would like to sell locally but will ship.

Parting out 340 engine, I am keeping the block and going with a stroker setup. Bought it used and found the pistons were installed incorrectly and the valves hit the pistons. I was told that it was rebuilt and run a very short time in the car. Machine shop looked at the internals and said the pistons, rods, lifters, rockers, rods, cam, oil pump, wind age tray, can be re-used.

Block is not for sale. I included pictures to show how clean the cylinders were after disassembly.

Pistons: .030 TRW

Crank: not available at the moment, being inspected for damage.

Heads: being magnafluxed this week, will see if the valves are ok or not. I will sell separately for $450 if they check out good.

Cam: I don’t know the cam specs.

Oil pan is straight and clean. Intake is an Edelbrock Torker 340.

Would prefer to sell the entire lot minus the heads for $750 but will sell parts separately if there is no interest in the lot.

72108B33-12DA-4C13-80BA-E313D4351E2D.jpeg


B6F89534-25D8-4E32-91F7-70D7EC89408C.jpeg


F9269BFF-DA82-4CB4-9086-620A57EC6756.jpeg


D7243B4E-7B67-4C65-A2CC-10308E924469.jpeg


AD590087-5E11-462F-B4F3-9E17B05BEF11.jpeg


65FA1722-16E1-4A7A-B2CA-CA16B2FF7735.jpeg


35646339-C717-45AE-BE37-4C621B428A4E.jpeg


746B8B51-D2CA-4711-B69F-8270D4EA6CCF.jpeg


318578E5-6C11-49B4-A5F6-5D2714801629.jpeg
 
interested in pistons an rods and possible the crank if you will sale separate
 
looks like someone put your pistons in backwards all 16 valves bent?
 
Thanks to everyone who has responded. I have sent a PM to those asking for pricing on specific parts.

teringer: Yes the pistons were installed backwards. The shop is inspecting the heads today and will let me know if the valves are damaged or not.
 
Pics of the cam. Any help with ID is appreciated. Stamped 1136 at the end. Thinking it may be an older Mopar purple cam.

2E356B78-461E-488B-9537-913F9DCE41F2.jpeg


5CEA8254-BCC7-4DF7-91C7-5358E1A5E83D.jpeg


3100322E-6ED0-4BDE-80AA-ACF0418071DB.jpeg


685B46DF-EE17-4354-A89D-6E87B759EFB3.jpeg


F09BC9D0-1927-4194-91FD-D6A366F0382A.jpeg


1793EFB8-076D-45F6-8352-22C6BDD98DB6.jpeg
 
Update: Crankshaft is SOLD. Oil pan is SOLD.

PM's sent to those who have replied with interest

Heads checked out great, no damage to valves, springs, etc. With minimal cleaning they are ready to bolt on and be used. The valves are 2.02 intake 1.60 exhaust

340 heads.jpg


340 head intake side.jpg


340 heads 2.jpg


340 J casting num.jpg


340 J head.jpg


340 valves 1.jpg


340 valves 2.jpg
 
Purple cam wont have a part number on it, only a 'contract' number on it. Measure the lift (lobe minus base) and youll pretty much have it ID'd.
 
Status
Not open for further replies.
-
Back
Top