What Radiator, Shroud and electric fan should I use for my 360?

Here is my set up on a '69 Dart, stroked to 418, Trickflow aluminum heads. Compression is a little over 10.0. Howards hyd roller. LA Small Block
MOP756A. Cold Case Radiator. This is for a '69, not '70 and above.
MIL-16251 Water pump, This a Milodon pump for a '69, cast iron, is 3/4"" shorter than the '70 and newer aluminum pump
Haden #2947 fan clutch
Mopar fan # 2863 216 , another comparable fan can be used
370-195 Flowcooler thermostat, 195°
Lower Radiator hose spring from CJ Pony parts,, or you can make your own.
My water pump pulley is roughly 6"
Bottom crankshaft pulley is roughly 6 1/2"
I have not needed a fan shroud yet.
Green Antifreeze 50/50 with reverse osmosis water. No puke/overflow tank, just let it find it's own level and leave it alone.
At present, and it's summer here, no overheating problems.
Sorry about no pictures, hate this site for pictures, it won't load the picture that loaded before, or a new picture with good lighting. If picture is wanted, pm me and will email it no problems there.