340 camshaft source P4452782

krazykuda said

Ken Heard can grind one with the correct intake duration, exhaust duration, intake centerline, exhaust centerline, lobe separation, overlap, intake lift, but .006" less exhaust lift than the factory spec 340 4 speed cam....

Seven out of eight of the factory specs dead on and one just slightly off... That's pretty close to the factory cam...

I don't think that there's anything else out there that will be that close...

Click to expand...

I heard back today and looks like a good deal ,,,,,
#2120

221/227 @ .050”, 276/286 adv, .438”/.456” lift, 114 sep

This is the grind we have been using that is supposed to be the cam you are inquiring about. We made this master from a cam that a customer supplied us that was supposed to be the factory Mopar cam. We have made quite a lot of them. We cam do a regrind for $79 on your core or make a new one for $179.



Thanks

Ken
1-800-539-9165