Crank no start

Bewy said

Try & isolate the problem. Connect a jumper from the coil [+] terminal direct to the bat [+] terminal & see if it starts.

If it does, then it seems you have a low voltage problem. Could be high resistance in ign swtch, wiring, plugs/sockets etc.

Click to expand...

ok tried to hot wire. Ran a wire from battery positive to coil positive. No start. Checked voltage at the end of the wire i ran to the coil 12.1 volts. Hooked it coil 11.2 volts. Hooked to +coil and Cranked with key 8 volts. How in the hell does that happen?