Proform 850 dialing it in closer
OK so here we go
Disclaimer first.
O2 sensor is at the end of the pipe so the full lean condition is false. only full throttle reading are accurate and all i care about at the moment.
After setting TPS to read 100% it got bumped and now 65% = 100%
RPM is sometimes not accurate at lower rpm, AND when i hit the rev limiter.
I almost feel like i need to jet it back up a couple jet sizes and then lean out the HS air bleed.(go bigger)
ADJ elevation was 84-8800 foot all day long.
Tell me what Ya think.
Purple o2
Black RPM
Red TPS
OK so here we go
Disclaimer first.
O2 sensor is at the end of the pipe so the full lean condition is false. only full throttle reading are accurate and all i care about at the moment.
After setting TPS to read 100% it got bumped and now 65% = 100%
RPM is sometimes not accurate at lower rpm, AND when i hit the rev limiter.
I almost feel like i need to jet it back up a couple jet sizes and then lean out the HS air bleed.(go bigger)
ADJ elevation was 84-8800 foot all day long.
Tell me what Ya think.
Purple o2
Black RPM
Red TPS
