Tubular K Frame Identification

famous bob said
AGREE , it does look like a mag. force , dont let these guys scare u , most of the bad mouthing is heresay , a few have had problems . I have had one on my 68 fastback for about 10 yrs. , look the welds over good , I also wouldnt run one w/o using a motor plate my self < just me .
The early ones were usually drag race front ends , no akerman in mine , drives great on good roads if ur going to run it on the street like I am , caltrac system doesnt help road manners much either !.

There have been multiple failures of the early style Magnum Force K members. Worse than that in my opinion is their customer service, as the guys with failures were generally not supported by MagnumForce.

Some of their other parts are fine, but with HemiDenny and RMS out there I’d never even consider a MagnumForce K member conversion. Especially not an early one.

Ted Carlson said
I have Magnum Force tubular upper control arms. Been on the car for years. Had the front end aligned and they have been on the car with no problems.

I don’t think I’ve ever seen someone that had an issue with the tubular UCA’s for the torsion bar suspension. I have a set I bought used, they’re good parts and I didn’t have any issues with them. MagnumForce does sell some decent parts. Their K members were the issue historically, especially that earlier design. Well, and their general lack of customer support. If all you do is point and click something on their website and it happens to be in stock it’s not a big deal. If you need actual customer support, not so much.

With all the other options out there now I’m kinda surprised they’re still around.