Motor mount options for header clearance

RON REAGLE said
I have read enough comments on installing TTI headers and the clearance problems on the drivers side of the engine. I have already installed a Flaming River steering coupler and am now experimenting with motor mount options to help with clearance. I AM NOT GOING TO TAKE A HAMMER TO $900 HEADERS "FOR CLEARANCE" UNDER ANY CIRCUMSTANCES. I went to NAPA and bought these 3 motor mount inserts. 602-1130 which are 15/16" thick , 602-1170 which are 1-7/16" thick and 602-1653 which are 1-3/4" thick. The 602-1653's are made with a torque limiter set up which I really like. They are actually for a Dodge truck with a Cummins diesel. If they will work those are the ones I'll use. They are also inexpensive ($18) each

View attachment 1715746005

I wouldn't put those in I put my tti headers in my dart 360 sport laying on the ground didn't have a problem at all with the drivers side but the passenger side was a real ***** only because I couldn't get the car off the ground very far now if you have a hoist they would be much simpler it took me about a 1/2 hour for drivers side and about 3 hours on the passenger side