What Are You Doing To/With Your Car Today?
- Thread starter MobileCustoms
- Start date
-
72Dart6pack
Harder Better Faster Stronger.
My bad. It's a BB. Forgive me. 
I adjusted my quarter windows today. Passenger side went well. Driver's side is giving me fits. So, I stopped for the night and will work on it again later.
Got the programmable shift light moved to where I can see it. It was on the steering column and would sometimes get blocked when steering the car with the left hand and right hand on the shifter. Now it shines right at my beak without issue. Was trying to keep it off the top of the dash and this spot works well.
FINALLY!! Set the motor and transmission back in the car!!! Tried to put the TTI headers in at the same time that didn't go well. Had to return the borrowed engine hoist so I gave up on the headers and just set the engine in place. This week I'll fight the headers in.
Wow - GREAT-LOOKING car!!
Brought
Is your passanger side engine mount supposed to be in front of the ears?
Looks great
Is your passanger side engine mount supposed to be in front of the ears?
It lines up that way , if I moved it behind the ears there was a gap that would've taken shims or washers to fill. Anyone else have an idea???
72Dart6pack
Harder Better Faster Stronger.
Passenger side on my 408.
Challngd73
Well-Known Member
Challngd73
Well-Known Member
Trying to finish
Still need exhaust, finish custom wiring, suspension rebuild
Still need exhaust, finish custom wiring, suspension rebuild
diymirage
HP@idle > hondaHP@redline
Nice
But one suggestion...loose the Firestarter air cleaner
One good backfire and that thing will light up your car like the 4th of July
72Dart6pack
Harder Better Faster Stronger.
I didn't wanna disrespect his car. But that's the first thing that gave me the YIKES
diymirage
HP@idle > hondaHP@redline
Sure, and if it were a simple matter of "me no likey" Ida kept my mouth shutI didn't wanna disrespect his car. But that's the first thing that gave me the YIKES
But this is like seeing someone put a plastic fuel filter 2 inches from the exhaust
I'd rather point out the danger then shuttie and read how it burned down a week later
LocuMob
Fluid Technician
My exact thought!
72Dart6pack
Harder Better Faster Stronger.
I call out the plastic fuel filter all the time. I agree to point out huge mistakes. Cars of this age are not replaceable.
72Dart6pack
Harder Better Faster Stronger.
Even I have a Metal one. I ain't risking anything on this Baby.
71DodgeDemon340
Well-Known Member
After about 7 years running a plastic filter i finally wised up and changed to a serviceable metal one. I changed the plastic fuel filter once a year and there was times when the plastic barbs were starting to curve and deform from the heat
Changed the location of the passenger side mount ( Thanks DODGY) and installed the drivers side header. Lots of clearance around the steering coupler now. Tonight it's the passenger side header and then touch up a few scratches from the install.
famous bob
mopar misfit
Getting ready to do the same , only big block.
Challngd73
Well-Known Member
Ripped out the old interior
Enjoying the Craft
Prepping engine parts on a hot day, AC going in the shop.
Prepping engine parts on a hot day, AC going in the shop.
Old paint seems about an inch thick, but finding very little filler in the doors, even along the lines.
I can't see the image. Interested on anything with paint as I am getting ready to paint my hood. this weekOld paint seems about an inch thick, but finding very little filler in the doors, even along the lines.
-
