Please help - need 360 alternator/PS pump bracketing pics

67fish383S said
Does anyone have or could take a picture(s) of a stock 360 LA alternator bracket setup? The car ('72 Duster, originally a slant 6) does not have A/C, but does have power steering. My phone crashed and lost all of the pre-disassembly pics I took. I’m trying to work out how it all goes back together before I start sealing timing cover and water pump gaskets. Google basically shows me aftermarket bracketing which is no help. Below is how it looks on the bench. It is the triangle bracket that has me a little stumped because the holes line up several ways. I could also really use some pics of the power steering pump bracketing. I'm installing a new Saginaw pump and the pic included with the part doesn't show how it interfaces with the timing cover. Thanks!!
View attachment 1715750635
View attachment 1715750637

Here's the non-A/C mounting brackets for the aluminum water pump....

The triangular bracket goes in the two long mounting bolts for the water pump and the curved bracket goes on top of the bottom of the triangle bracket...

70s alt bkt no ac A02.JPG

The large triangular bracket in your first post is for the p/s pump mounting... It mounts in the bottom long bolt for the water pump, and the first shorter (Left side) bottom bolt for the water pump... We lost the long spacer that the p/s pump mounts to, so we used chrome spacers to fill the gap....

70s alt bkt no ac A11.JPG

With this set-up all of the belts line up perfectly...