[WANTED] 9” Drum Spindles
- Thread starter Redfoxestco
- Start date
-
- Status
Redfoxestco
Well-Known Member
Rusty! That would be incredible. How much would you like? Any chance you can FedEx em over? I was just in GA. if it’s easier I can send someone to pay you and pick em up, that way you don’t have to deal with all the shipping malarkey
Yeah I'd go for that. I don't know. Whatchyoo wanna pay? lol You want JUST the spindles, right? I'll have to take um off the backin plates, but oh my God that's such a five minute headache. LOL
Redfoxestco
Well-Known Member
Just the spindles and bolts. If no to bolts, that works too. How does $100 for the pair sound? Or I’ll send back the backing plates so you don’t have to! Lol
I don't know what the difference between 9" & 10" drum spindles are, aside from the backing plates, but I have 2 10" front assemblies from a 69 Dart GTS. Spindles, backing plates & all the bolts, spindle nuts & washers, good shape & clean if that will work for you. I think I can fit it all into 1 USPS large flat rate box, (would be about $23 shipping)so price with all this including shipping to you from Pa. would be just about $175. I can take pictures if your interested or RustyRatRods deal doesn't work out for you. (Don't want to step on anyone's toes)
I’m thinking the Wilwood kit the OP wants to use calls specifically for 9” spindles.
Redfoxestco
Well-Known Member
Yes, thank you for your quick step in and help niceolddart but unfortunately it calls for 9”.
Not a problem. Can you, or someone tell me the difference between the two spindles? Maybe the spindle shaft diameter or backing plate bolt holes are different. I really don't have a clue. + it would be another piece of knowledge that I have. Thanks.
9” and 10” are completely different. Different bearings and spindle diameter.
I can post pics of them side by side if you really need them . But Rusty should have you covered. At the price that was stated he is giving them away. I used Strange brakes that called for 73 up disc spindles. The reason I switched was I wanted 2 inch drop spindles and were only available for 73 up . Close to $500 a pair.
The 9" spindles have small bearings and also take small ball joints. I was going with wilwood until I found that no drop spindles were available for the 9" application. I decided to go with strange race brakes and I am glad I did. I could not get an answer from either , Strange or magnum force if they would work together? They fit right up. Fat man are welded up steel. Magnum force are stronger drop forged and worked perfect for are new car build. No welds to rely on.
Magnum Force Mopar 2 inch dropped spindles for Dodge and Plymouth
The 9" spindles have small bearings and also take small ball joints. I was going with wilwood until I found that no drop spindles were available for the 9" application. I decided to go with strange race brakes and I am glad I did. I could not get an answer from either , Strange or magnum force if they would work together? They fit right up. Fat man are welded up steel. Magnum force are stronger drop forged and worked perfect for are new car build. No welds to rely on.
Magnum Force Mopar 2 inch dropped spindles for Dodge and Plymouth
as you can see the 9 inch first pic are totally different and have a right angle ball joint attachment where all others have a stronger straight on attachment
You can have the drums and all. Unless you just slap don't want all of it. Either way. Just let me know "WHAT" and "WHEN". LOL
Just shoot me a PM and we can go from there.
- Status
-
