[SOLD] 66-76 Automatic shifter console sliders

-
Status
Not open for further replies.
moparmat2000

moparmat2000

Well-Known Member
Joined
May 13, 2010
Messages
20,866
Reaction score
10,821
Location
Grand Tetons
Rating - 100%
67   0   0
Contact seller
5 Automatic floor shifter sliders. Fits 66-76 A body and 66-70 B body. These are new repops made by me after purchasing a supposed "repop" only to be very disappointed by the quality, or lack of. First off the shifter hole in the "repop" I purchased was elongated and not round. Does not fit the shifter very well. Also it had a rough pebble grain, and very rough edges. It would need to be filed to fit, and was really thick and not very flexible. I included photos of it on the right side of the first 2 pix as a comparison, with mine on the left. I made 5 of these besides the one I made for myself. $20 shipped per slider anywhere in these 50 states. Located in west Texas. I accept PayPal.

20210417_192056.jpg


20210417_192107.jpg


20210417_192211.jpg
 
Because of the overwhelming response, I took the time to fabricate 10 more of these for anybody who's interested. They are made for the width of the OEM A body top plate I have. I also test fit this in a repop A body top plate i have and they are a little snug on the sides. They will require a small amount of filing or sanding on the sides to fit the repop plates. I elected to leave them the wider width for the OEM plate, so they are not too loose in the OEM plates. See pic below in repop plate

20210419_173334.jpg
 
Last edited:
I'll take one.

I think I know where the "repop" you bought came from. They look very much like the factory slider in my Durango...
 
Status
Not open for further replies.
-

Back
Top