68 valiant signet

not much done today. i 'nibbed' the copper gaskets back with my die grinder and a tungsten bit but still had to reduce the diameter of the plug socket on my lathe. the plugs are all in and tight now ready for making the plug wires.
next i ran the battery cables to the starter, changing the activator wire connector for a spade to suit the new mini starter. then i made a bracket from under the chassis with a rubber sleeve on it to zip tie them to so they can't touch the header tubes either side of them.
as i said not much but it all needs doing so.....
oh, and i filled the engine/rad' with an antifreeze mix and there are currently no drips anywhere. result!
neil.