[SOLD] $5.00 Fire Sale

-
Status
Not open for further replies.

68 CUDA FORMULA S

Well-Known Member
Joined
Aug 20, 2009
Messages
2,431
Reaction score
1,093
Location
Clarkston Michigan
Rating - 100%
72   0   0
Contact seller
Here is a bunch of left over stuff that is either from my 66 build, or from the 74 Scamp build or just stuff that I have accumulated over the years. If you see anything you are interested in $5.00 plus shipping from Michigan. The very bottom 4 prong resistor has a crack in the porcelain, the castle nut all go together, the brake stuff all goes together, the trans brace is for a /6, the ash tray came with the 74 Scamp, and the dome light cover is for a 66 barracuda. I will ship it the cheapest way possible and combine shipping also, if you have any questions or need better pictures let me know.
Bob

001.JPG


002.JPG


003.JPG


004.JPG


005.JPG
 
Last edited:
I'll take the Two Front Drum Axle Covers and the Castle Washers beside them (On the Orange Box) Please! (and Thank You)
 
Here is a bunch of left over stuff that is either from my 66 build, or from the 74 Scamp build or just stuff that I have accumulated over the years. If you see anything you are interested in $5.00 plus shipping from Michigan. The very bottom 4 prong resistor has a crack in the porcelain, the castle nut all go together, the brake stuff all goes together, the trans brace is for a /6, the ash tray came with the 74 Scamp, and the dome light cover is for a 66 barracuda. I will ship it the cheapest way possible and combine shipping also, if you have any questions or need better pictures let me know.
Bob

View attachment 1715753120

View attachment 1715753121

View attachment 1715753122

View attachment 1715753123

View attachment 1715753124
Is that an ignition coil holder?????
 
Please measure bearing covers I see 2 pictured thanks Chris
They look new I have a log splitter missing some
 
Hey Geof I do believe they are from my 66 build and they do look just like the ones in my 66 so they are your's I will ship them to you. Lord knows you have shipped me enough stuff over the years.
Bob
 
Hey Chris the dust covers are gone and by condenser are you referring to the valve cover breathers? If so the older one has MADE IN THE USA stampped on the top the newer one does not.
Sorry I thought I seen two condensers for distributors one used one was lying next to what appeared to be a new also thanks
 
You are right I had a brain fart, "condenser" I was thinking A/C I forgot they were there. The used one has made in the USA the new one has GERMANY on the back.
Bob

Ok , are they both $5.00 plus shipping if so I want um thanks Chris
 
Status
Not open for further replies.
-
Back
Top