Evans waterless coolant

I’m one of the few who won’t use anything else. I like the fact that it doesn’t require a pressure cap. I can take the cap off at maximum operating temperature and it doesn’t explode hot coolant all over you.

It’s also easier on the hoses and clamps without the pressure on it.

If the cooling system can’t keep up I’d fix the system.

BTW, my engine never ran above the thermostat rating, even with Evans coolant in it. At one time I blocked off the bypass and took the thermostat out just to see if I could take out one more restriction. Even on a 95 degree day I couldn’t get the engine temp up to 135 with the car sitting. It would go about 150 or so diving. I need a heater so that wasn’t going to cut it. So I had to hook up the bypass and put the thermostat back in it.