Oh ok they were in a barn sure they been stuck quite awhileThey are all varnished up.
Soak them over night or even a few days in solvent, penetrating oil, diesel, gasoline, or whatever you have at hand.
They will loosen up especially if you put them in the hot sun while soaking.........
Barn?Oh ok they were in a barn sure they been stuck quite awhile
That is a good sign maybe you can save them.Oh ok don't see corrosion inside wirst where goes the rod underneath pistons
Yah hopefully think they just have soak what said above.Thinkin magic marvel mystery oil.there stock 1970 440 pistons still look like there in good shape.That is a good sign maybe you can save them.
So pb blaster should free them?I usually soak them with Blaster or some penetrating oil and a little heat.
I dont think just spraying some PB blaster is going to do it, they need to soak.So pb blaster should free them?
Oh ok true on that they do alright l seeI dont think just spraying some PB blaster is going to do it, they need to soak.
The cheap way to do it would be to soak them in diesel fuel
Diesel and ATF 50/50 makes a great penitrant, cheap enough to me a dunk tank. Soak overnight and then take out and try and move the pistons on the rods...continue soaking until you can move them.Oh ok true on that they do alright l see
Yepsoak them
Oh ok