Here’s my situation. I purchased a 73 duster a while back and a 70 duster before that. The 70 duster was complete and it was very bad rusted out like, no floor pans, no trunk pans, no quarter panels and the tail panel was gone. So I stripped all the good parts off the 70 so I could put them on the 73. The 73 was just a rolling shell, no doors or hood or fenders. So I have since put the doors, the hood and the hole front end on the 73 and scraped the 70. My question is, since the doors and everything on the car including the trim around the top of the door is 70, should I use 70-72 weather seal gaskets on the doors?
