Harmonic Balancer Installation Tool Questions

Hyper_pak · Jun 25, 2021

Need to press a ROMEC on to my slant.
I used to pull the stock ones on with a long crank bolt.
But the ROMEC is thicker and I need a tool.
Any recommendations?
Please don't recommend all thread and a nut.
Thanks

RustyRatRod · Jun 25, 2021

Hyper_pak said:
Need to press a ROMEC on to my slant.
I used to pull the stock ones on with a long crank bolt.
But the ROMEC is thicker and I need a tool.
Any recommendations?
Please don't recommend all thread and a nut.
Thanks

I have this. It works very well pulling and installing.

Performance Tool W89711 Performance Tool Harmonic Balancer Puller and Installer Sets | Summit Racing

Blind Squirrel · Jun 26, 2021

Same one I have. Bolts a little on the cheap side. But works well both on and off. Recommended.

bcschief · Jun 26, 2021

You can rent the correct tool from Autozone P/N 57144 for $47.00 when you return it you get all your money back. OEMTOOLS Harmonic Balancer Installer Kit (autozone.com)

mopowers · Jun 26, 2021

bcschief said:
You can rent the correct tool from Autozone P/N 57144 for $47.00 when you return it you get all your money back. OEMTOOLS Harmonic Balancer Installer Kit (autozone.com)

I've done that in a pinch when I couldn't find mine. They work just fine.

pishta · Jul 8, 2021

Get a Lisle brand balancer puller, the one with a hollow jack screw. The jack screw is the same thread pitch as the Mopar crank bolt so you can thread the jack screw into the crank and use a nut to run the balancer on while holding the jackscrew with its 1/2 hex end. Nothing wrong with all-thread and a nut as long as its the right size, that's what the dedicated installers use anyway.

Hyper_pak · Jul 8, 2021

Thanks guys, I purchased a install tool from Summit.
All good.

Harmonic Balancer Installation Tool Questions

Hyper_pak

Old School Chrysler Fan

RustyRatRod

I was born on a Monday. Not last Monday.

Blind Squirrel

Well-Known Member

bcschief

Well-Known Member

mopowers

Well-Known Member

pishta

I know I'm right....

Hyper_pak

Old School Chrysler Fan