, I had seen the off set rear shackels,, but not the fronts,, I'll look for those.
another question.
when the perches are moved,, are the existing ones typically scraped when they are cut off?
asking as the 8.75 housing that I have now has new perches on it, can they be cut off and moved, or it best to just pick up another set?
No take a cold chisel and hit the perch in the weld corners, just a cut. Then use a big 5 lb hammer and hit down between the housing and perch. Pop right off grind a little and use again. Done it many times. The hole is the right size too!
