Turns signals don’t work

Usually a good place to start is to check your grounds.

Which fuses were bad? What circuits are they? Did you check the fuses again? If you have a problem with the wiring in that circuit it will just blow again so recheck the fuses.

Check the wiring on either side of your bulkhead disconnect, especially on the interior. Look for any melted or deformed insulation. Look for wires stuck together with melted insulation- not just at the disconnect but anywhere up under the dash. get a mirror and flashlight if you have to. Mopars are alias for problems with that. That's a whole other topic to talk about with some preventive actions you can take.