L.A 360..Magnum ?

Like almost everything else these days, Eagle rods are made in China, but their I beam rods are made to some nice tight specs. They also use a bushed small end for a floating pin, ARP 2000 bolts, and a matched set of 8 weigh within 1 gram of one another. It's a 6000 rpm rod all day long. About $300 and change for a set of 8, and arguably better forgings than OEM. Last set I bought was $319 shipped to my door.

By the time you take the OEMs and
1. Shot pen
2. Magnaflux
3. Check for straightness
4. Install new ARP rod bolts
5. resize the big ends

You will still be into time cycled stock forged rods with typical pressed pins for way more than these new. Add about $150 to that $300 price tag and you can have new Eagle H beam rods which are even better.

Make no mistake, I'm no big fan of China. They do make some junk. However they will make whatever you want, and to the exact specifications you want. Some stuff coming out of there is pretty good.

Look into procomp bare heads. Eddy copies. They are essentially cast as magnum chambers and runners in an LA style aluminum head. The guides are junk, and they are machined for 2 02"-1.60" chevy valves. But install new guides for whatever valves you want to run.