354 Hemi

-
RAMM said:
Yes I know it's not exactly a small block or a Gen 1 354 but it is a Mopar and it does make some decent power.

2005 5.7 Block 3.947" bore x 3.625" stroke (offset ground 6.1L crank HRJ)
Arrow 6.200" .866" 1.89" Honda Rod Journal Piston guided
Custom JE domed slugs Comp 11-1 .043"/043" 3 mm TS AP rings
ARP studs/Head Bolts
Custom Cam .630" 111 LSA 240's @ .050"
Early 5.7 Heads with 6.1 intake port/filled floors (300 cfm @ .500-.600")
Manley 2.04"/1.57"
Cascar intake
Holley XP 650 dbl
MSD HEMI programmable timing

Made 542hp @ 6900-7000 457 tq @ 5100 rpm with the Jone Racing setup and small PaceSetter headers for a 300C. Pretty decent small cube build I think. It's going in a 70 Cuda with a 4spd--should be fun. J.Rob

p.s. Mods feel free to move this thread to wherever it belongs.

View attachment 1715758856

View attachment 1715758857
Click to expand...
not only did you get great numbers m but it looks great . amazing work you have done
 
This is very inspiring! I have a '05 Ram 5.7 core engine that was absolutely mint on teardown, that I'm cobbling together. I went with 6.1 SRT-8 heads and aftermarket forged dome pistons by DSS for the valve reliefs and around 10.5:1 compression and a Bullet 234/238*@.050" cam with .588" lift and a 112*LSA. Figuring the heads and cam are going to soften the bottom end enough, I went with an OCP dual plane intake and I'm hoping to have enough clearance to run the 6.4L "392" shorty factory headers. If not, I'll have to go long tube ($$$), but it would have to help where I'll need it. I'm thinking about a 904 trans with wide ratio gears and at least 3.55 gears to keep the revs up. Hoping for 425+hp with the stock stroke, so wish me luck... Thanks for the Gen III post!
 
65wgn440 said:
Yeah, help empty my bank account ! Ha-ha.
Click to expand...
LOL! Well…. OK….

1: If married, divorce your wife and/or make five babies with stranger women while leaving your contact info behind.

2: Join the democratic socialist peoples party, live there dream.

3: Smoke crack, ****** and drink heavily daily.

4: Please donate to the “Help rebuild/restore my rumblefish project HEMI stroker project!”

You can really skip the first 3…
:rofl:

Seriously, best of luck on your endeavor.
 
Little brothers ready to kick some big ***. Really nice numbers on a really nice build.
 
You must log in or register to reply here.
-

Back
Top