[WANTED] WANT TO BUY - Cragar Lug nuts for SBP. 7/16-20 .59 Shank OD. .75 Shank length

-
Status
Not open for further replies.

GrrageCat

Member
Joined
Apr 5, 2017
Messages
20
Reaction score
6
Location
Los Angeles
Rating - 0%
0   0   0
Contact seller
Going with the Scarebird conversion to keep my SBP Cragars. The kit came with new hubs so I need 5 right hand thread mag lugs for my wheels. They seem to be back ordered on Summit/Jegs/Amazon/ebay.

If you have a few please let me know so I can finish up the conversion. Thanks!
7/16-20
Shank Length - .75
Shank OD - .59 (Do not need the bigger .68 since those will not fit)

I think the cragar part number is 09004-4
 
Here are the guys we always use for the mag wheel chrome lug nuts.

Fast ship, great quality, contact them for your specific size you are looking for.

Ships out of St. Paul MN
Good Stock Supply

Screenshot_20210707-002816_Chrome.jpg


20210707_003105.jpg
Screenshot_20210707-003213_Chrome.jpg
 
Those are exactly what I need. Summit says they will ship out in October if ordered today. Really don't want to wait that long just to get a wheel mounted.

If a member doesn't have 5 left over to sell I might just take some bigger ones to a machine shop to have them narrow up the shank.

I ordered some from lugs from LugNutGuys on eBay and got the .68 diameter shank by mistake. Emailed them back and they said the manufacturer is out right now and backordered.



Heres what I use, not sure the exact size. Had this pic saved on my phone.


View attachment 1715761620
 
Last edited:
I'm in Ontario, and ordered from these guys.
Wheels & Tires in Oshawa, Ontario | Taunton Tire
Now that you got the part #, maybe call around to the local tire shops?
Those are exactly what I need. Summit says they will ship out in October if ordered today. Really don't want to wait that long just to get a wheel mounted.

If a member doesn't have 5 left over to sell I might just take some bigger ones to a machine shop to have them narrow up the shank.

I ordered some from lugs from LugNutKing on eBay and got the .68 diameter shank by mistake. Emailed them back and they said the manufacturer is out right now and backordered.
 
Yep it is silly they sell them in a pack of 4. I have some at the shop but am on my way to Carlisle, so if you can't find any by this coming Tuesday let me know...
 
Same here I am looking 10 of them same old style actually part number 09005.4 I could be wrong. I'll see if I can uploaded photo of it.

[ATTACH =full]1715761702[/ATTACH]

IMG_20210625_051735412.jpg
 
I think I still have some of those......I'll check. IIRC they take an 11/16" lug wrench, and not 3/4" like snewpy's link shows.
 
Got a pep boys nearby? They are closing lots of stores, but when i was in a couple stores a few days ago, they had a good selection of mag lugs, 50% off.
 
I'll call up the local Pepboys.
The speedway motors link is the right size shank, but they are out of stock until at least July 30th.

@cudamark lmk if you find 5 laying around you're willing to part with. The ones I have on the car right now take the 11/16 socket to get off. I only need 5 since the new hub for the disc conversion has RH thread and the old LH thread lugs I have will not work.
 
Have several coffee cans of old mag lug nuts. PM if still looking can go through them, although most of what I have is likely from a GM application. Dave S southern NM
 
Thanks for looking @cudamark

Think my best bet is to wait for @HemiSSDart to get back from Carlisle.

@newmexguy It might be hard finding the SBP mag lugs since they are the small diameter.

Here's a pic with the difference from .68 on the left and the .59 shank diameter on the right.
Screen Shot 2021-07-09 at 11.29.27 AM.png

Screen Shot 2021-07-09 at 11.29.34 AM.png
 
I have 7 brand new 7/16 right hand thread with washers Dynamark lug nuts. Package says "Long Mag ,Std & Tri Lug Washers". I bought these for Cragar SS wheels. I can upload a pix tonight.
 
Shank is 3/4" OD.is 9/16". New in original package. Let me know and I'll post pictures.
 
Last edited:
Obviously these are getting harder to find, I'm going to call and see about getting some. Do you want me to see about extras for you? I'm in Ontario
 
.....@4spdragtop let me know if they have any of those .59 shank OD in stock.....


I have 7 of them new in the package.
 
Lol, found some crusty oldies in the "way back" box............. 7/16"-20 R .590"Ø X 9/16" L .........
upload_2021-7-14_15-13-38.png
 
Status
Not open for further replies.
-
Back
Top