Degreeing a Cam, or not.....

Kent mosby said
I finished checking the Lobe centerlines. I got 109* for the intake and 115* for the exhaust. With my checking without a degree wheel and taking all measurements off the balancer I think the measurements are pretty close for the centerlines. Would this make you comfortable leaving it as is?
Click to expand...

If you’re confident in the measurements, you should be good.

Remember, you were trying to verify the cam wasn’t way off, for some strange reason.
You lined up the dots....... it “should” be close.

The 109/115 is a 112lsa installed 3* advanced.
Only 1* off from the cam card.