Looking for Automotive Wiring Tech in Dallas TX
1972 Dart Swinger 2 door...
Another blah blah blah build...
My engine compartment has been mostly smoothed out so, I want the wiring minimal in the engine compartment.
- Battery relocation to trunk. (I have cracked back working on some nice cables.)
- I will be running a small block with an in-tank fuel pump and Edelbrock Pro flow 4 EFI, with a ready to run distributor that came with the package.
- Rear taillights, blinkers, trunk light and License plate light. I have a stock replacement harness from M&H
- Side markers are shaved on all 4 corners, so no need for those.
- Front is LED headlights, with stock plugs, stock turn signals in the grille, and stock fender mount turn signals.
- Dual electric fans on an aluminum aftermarket radiator. I have some relays for the fans.
- 904 Auto trans with Reverse manual valve body and a lock up torque converter, so I will need a momentary switch for the neutral safety start and an on off for the torque converter. I am using an SCS cheetah shifter.
- Interior is stock gauges, would like to bypass the ammeter in favor of a voltmeter. Door light switches, head lamp and high beam switch, dome light and a heater.
