Sniper EFI and ignition type

In the midst of hooking up a Sniper EFI and have ran into some questions about which method to hook up the ignition wiring to it. My main issue is with what kind of box my MSD 5300 is.

Here’s my ignition setup:

Ignition control Unit: MSD 5300 (like an orange box, has the stock Mopar plug)
Coil: Blaster 2 coil
Rest of the ignition is stock Mopar wiring except the ballast resistor is removed.

Issue is I can’t find any info on the MSD 5300 box, Holly tech line had no info or suggestions other than to buy a 6AL. They said the 5200 is a similar box (inductive type) and won’t work with the Sniper system. I asked why not, because the yellow wire just hooks to the coil -ive on an inductive type setup. There really was no answer for that question other than they had no information and to buy a new box.

I need to know if the MSD 5300 keeps the ignition system as an inductive type or if it’s a capacitive discharge style box. This will help me decide if I wire the Sniper yellow to coil -ive or use the jumper wire and tap into the tach output from the MSD 5300.

anyone had experience with the MSD 5300?

Thanks