Sniper EFI and ignition type

Thanks for all the replies guys, it appears there's still much more for me to dive into this project than initially anticipated. I was under the impression these things setup fairly easily, but maybe there's more hiccups with a Mopar setup?

@67Dart273 , that manual is the one I am using yes. Page 22 & 23 to be exact are what I'm referring to. I initially though I'd be hooking it up just like the bottom picture on page 22. But doing some reading on page 23 and talking about how you can fry the ECU if you hook up the yellow to coil on a CD system got me worried. Then I got questioning as to whether or not this MSD box is CD or not, or if it would be messing with coil -ive in a bad way and damage something. I'm more worried about damage than anything at this point.

If it makes may difference, this 5300 box does have a tach signal spade coming out of the opposite side (green wire in picture) which is currently hooked up to my aftermarket tach. I wondered if I could hook up there like on page 23 without issues?

@rmchrgr , short of shelling out a whole wack load more of cash, is there anything preventing me from using the stock Mopar electronic ignition module (get rid of this MSD unit) and just hooking the sniper up to the coil -ive? Yes the Blaster 2 coil is canister style, but I have made sure to route all my wires and stuff away from any sources that could cause interference. I have read that people have successfully used the Sniper system with the Mopar orange box ignition system. Obviously this doesn't give me timing control and perhaps is limiting what the EFI is capable of, but I wasn't looking for an all out performance/tunability build anyways. This is just a daily driver I was wanting to add EFI to.

It's understandable that shelling out all the money for everything that works together and basically just plugs in is the best option and will perform the absolute best. In my case being up in Canada we get screwed with exchange and shipping. I'd be into well over $800 just for parts without shipping. Not trying to be cheap, just realistic about building costs. Surely people have used a Sniper system with a stock ignition setup?

Thanks again for all the helpful info, gives a lot to think about.