Mild 360 Magnum Build

360 magnum block.
Stock crank cut 10 thou.
Stock rods with ARP bolts.
30 over rebuilder box pistons, block decked so pistons are 50 thou down same as stock.
Cam is a lunati replacement roller
Advertised duration 276 in 284 ex
Duration at .050 210 in 218 ex
LSA 112/106
Rpm range 1200-5200
Cam was recommended by Jesse( J.Rob )on this site after I gave him the specs and intended use so I want to give him a big thanks for this!

Top end is EQ magnum heads
Valves are Chevy LS long 202 in 160 ext
Stock rockers with custom stands to lift them for the long valves.
Heads are blow ported with a bit of intake runner work, flow around 275 in and 190 ex at 500 lift.
Air gap dual plain intake
Mopar performance distributor
Ran my 750 AED carb
Add 1 inch spacer for the last pull
Did no carb jetting
39 degrees of timing…could have gone more as it picked up power ever time we added some…but I already was where I wanted to be