2 SP WIPER SWITCH WIRING

Pawned said

I have searched the thread and can not find what I need.

I have a 2 speed wiper motor and switch. The problem I am having is my schematics show one wiring pin-out, The service manual schematics have a completely different pin-out. And neither of them match the switch.

Below I have drawings that show the switch as it is labeled.

Can someone please tell me which lugs on the switch, connect to which of the firewall connectors?

I do hope I am making sense

Thanks in advance

Ed

View attachment 1715769222

View attachment 1715769223

Click to expand...

Is it possible that P1 and P2 are actually F1 and F2? I was looking at my wiring diagram and the switch is labeled with "B", "P", "A", "F1" and "F2" next to the wires. Maybe your H is actually a "P"? Don't know.

Might go back and look at your diagram and see if those labels are there.

Not sure why the diagrams you have would disagree other than the color of the wires. If that's the case, I would stick to the diagram that matches the harness and ignore the others.

I can't make heads or tails of the diagram so only guessing at which wire does what. "A" appears to go to the resistor, and "P" is maybe for "Park"? So maybe "F1" is for slow and "F2" is for fast? Just WAG's.