[WANTED] 4.30 or 3.90 gears for a 8 3/4 rear

Garrett Ellison said:

Hello neighbor! I may know where there’s a set at. I’ll find out for you sometime next week. Would 4.10 be okay if they’re available? And if you’re just looking for gears, what case number do you have?

Click to expand...

33IMP said:

@Dr John OConnor PhD , if you want just gears, we need to know which center section you have. 741, 742, and 489 case all take different sized gears, for the same ratio.

Click to expand...

Oldmanmopar said:

I have a low milage set of 391's from a Duster approximately 30k. I had the motor at carlisle on a run stand. The motor sold.

I am using the housing to rebrace another rear for a Race car build. I am Keeping the 4 spd set up. The carrier is still in the housing. It is a 391 suregrip. 489 carrier. I drove the car once a year since 1979 then into the shop to strip it last year . The rear is sitting in one of the race trailers complete drum to drum.

I will sell the carrier complete for a reasonable offer. I live in Pa. They ship in a double bucket truck freight. pretty cheap. I have several out but I know this rear is a bolt in ready to go small joint . I only recently decided to use the housing for the Demon due to a new style bracing we are using. I am selling the braced housing that was from my other Duster that we have in the Demon now for set up. I have other 391's. but do not know there history. I also have ratios

View attachment 1715770376

View attachment 1715770377

View attachment 1715770378

View attachment 1715770379

View attachment 1715770380

View attachment 1715770381

Click to expand...

Garrett Ellison said:

Okay! When I cam catch my neighbor in his shop I’ll get up with you. The last time I was there he had a set of 4.30:1 gears for a 489 case. That is, unless you find something else first.

Click to expand...