Christmas in July!

-
MrJLR

MrJLR

Built, not bought
FABO Gold Member
Joined
May 14, 2015
Messages
5,619
Reaction score
6,711
Location
Menifee, California
Look what Santa brought me for my 392 stroker!

20210726_174423.jpg


20210726_174430.jpg


Exciting!

Jeff
 
Double check them port sizes on the intake... Mine were WAY small
 
MrJLR said:
@Heywodja
How do you like your system overall?
Any hood clearance issues?

Jeff
Click to expand...



I have not installed the full system yet, will be in a couple weeks, we just went to the dyno with a carb.

This is a, EFI super victor manifold and Edelbrock lists it @ Center Maximum Height 6.300 in

For comparison Edelbrock lists the performer RPM @ Center Maximum Height 5.350 in

Before porting you can see how much porting was necessary just for gasket matching.

efi manifold before.JPG



After porting for port / gasket matching.

efi manifold after.JPG
 
Heywodja said:
I have not installed the full system yet, will be in a couple weeks, we just went to the dyno with a carb.

This is a, EFI super victor manifold and Edelbrock lists it @ Center Maximum Height 6.300 in

For comparison Edelbrock lists the performer RPM @ Center Maximum Height 5.350 in

Before porting you can see how much porting was necessary just for gasket matching.

View attachment 1715772029


After porting for port / gasket matching.

View attachment 1715772028
Click to expand...
So it's about an inch taller....a drop base filter and maybe a little thinner element and I should be fine.....
Gasket matching...fun!
Not hard....just messy!

Jeff
 
I think the EFI throttle body is about an inch shorter than a carburetor .. so it all probably comes out in the wash.
 
You must log in or register to reply here.
-

Back
Top