[WANTED] Heads

-
Status
Not open for further replies.

nodemon

FABO Gold Member
FABO Gold Member
Joined
Mar 21, 2015
Messages
1,130
Reaction score
596
Location
St.Louis
Rating - 100%
9   0   0
Contact seller
Anyone have a decent, ready to bolt on set of 318 heads they're willing to let go cheap, because shipping is going to kill me...$$ Unless close to St.Louis.
For a 73 318.
Thanks..!
 
What head are you looking for specifically? I’ll show you what I’ve got available. I would recommend new valve stem seals. Shipping would be $60 USPS in two separate large boxes.
 
What head are you looking for specifically? I’ll show you what I’ve got available. I would recommend new valve stem seals. Shipping would be $60 USPS in two separate large boxes.

Send me info here of what you have..
318 heads, 73 and earlier.
 
Last edited by a moderator:
Okay, I apologize, I didn’t know that you were wanting the early heads by your original post, only the year of engine. I have late 302 fast burn castings and early eighties heads. I know someone on here who has a set of 675 318 heads. I’ll see if they’re interested in parting with them.
 
Last edited:
Okay, I apologize, I didn’t know that you were wanting the early heads by your original post, only the year of engine. I have late 302 fast burn castings and early eighties heads. I know someone on here who has a set of 675s 318 heads. I’ll see if they’re interested in parting with them.
Right on..!
 
did you find your heads, I have two pair of 675's in Milwaukee, Wisconsin not that far from you.
 
that I am not sure of. one pair came with a car I bought. they were removed and 340 x heads were installed on the motor it ram well so the heads may be in good condition. the other set of heads are on a motor I pulled from a car I bought. although the car had sat for quite some time I had rode in it several times as it was a friend of mine. either way I would sell a pair, they are used heads.
 
Anyone have a decent, ready to bolt on set of 318 heads they're willing to let go cheap, because shipping is going to kill me...$$ Unless close to St.Louis.
For a 73 318.
Thanks..!

@d5667 is in that area. Maybe he can help.
 
I do have heads. It really depends on what you are looking for.
 
I get 50 each-these are NOT 302’s and not fresh out of the machine shop. Good heads that ran good.
 
Status
Not open for further replies.
-
Back
Top