[WANTED] 15x8 wheel small bolt pattern

-
Status
Not open for further replies.

JeffreysDart

Well-Known Member
Joined
Aug 12, 2015
Messages
212
Reaction score
17
Location
Redwood City CA
Rating - 0%
0   0   0
Contact seller
looking for 15x8 wheel with backspace 4.5 or less and small bolt pattern or uni lug pattern to fit original A Body rear end

pic for attention and similar set up (not my car)

1967-plymouth-barracuda-street-strip.jpeg
 
I checked the wheels , 4 3/4 backspace , you would probably have to run a spacer or get the 3/4 spring kit , to move the springs. I remember they were tighter than I wanted on my Duster. They were supposed to be 4 1/2 backspace , they came from either , Jegs or Summit , I don't remember , it was 2018 when I bought them.

Frank
 
If looking for one wheel I have the parts on hand to make one. If you want two I'll have to get some more wheels to make the second. I'm in St Louis Mo. PM me if intrested
 
001 (6).JPG

The more back space the more its gonna tuck under wheel well correct?
these is a standard back space 15x7 wheel
 
You want mags or steelies? I got some 15x6 4.25BS chrome smoothies in SBP. Look like this without the dual pattern. Not that common to find a 15 in a SBP. PM me your cell and Ill shoot a pic.
duct%2Fcache%2Fimage%2F265x265%2Fbeff4985b56e3afdbeabfc89641a4582%2Fs%2Fm%2Fsmoothie-15x8-chrome.png
 
The more back space the more its gonna tuck under wheel well correct?
these is a standard back space 15x7 wheel


Correct.

But ... The inner fender, wheelwell and leaf spring will dictate how much backspace/tire size you can run.
 
The more back space the more its gonna tuck under wheel well correct?
these is a standard back space 15x7 wheel


Correct.

But ... The inner fender, wheelwell and leaf spring will dictate how much backspace/tire size you can run.
true!
 
Status
Not open for further replies.
-
Back
Top