replacing the fuel line in my duster its not stock who makes a cheep line i can use for a short time while i make a braided line system at the moment its a 440 with fuel cell thanks
fuel line
- Thread starter squidbob
- Start date
-
68dodge
Well-Known Member
Just use aluminum line. Easy to take of and bends nice to Fit the frame to the motor. Plus it will last.
Don't use aluminum for fuel lines as it can easily crack! Use Ni-copp instead - easy to bend as well but will last and doesn't crack.
Kendog 170
Let the boy go !
I used aluminum. Mount it securely and flexible line at each end . I bubbled the ends on mine.Ni-coop is good .
Summit Racing SUM-G2538 Summit Racing® Aluminum Fuel Lines | Summit Racing
mygasser
Well-Known Member
i've used both 8mm (5/16) and 10mm (3/8) micro bore copper central heating pipe. lots of clips to prevent cracking as with the ally and it's fine.
neil.
neil.
moparstud440
Well-Known Member
I've used Jegs brand alum 1/2" line without any issues. I redid the front half of my fuel line this winter as I went from underchassis headers to fenderwells and wanted to route my fuel line further from where the headers were. I ended up using Jegs brand braided line and fitting and came out nice.
-
