Kframe, engine bay, front suspension questions
After doing some reading it looks like the L and R go to the rear. I took LCA right off to put tbar in to rear socket from front. Then reinstalled LCA. Combo of antiseize and grease in the sockets and on ends.
Torsion bar adjuster in loosely. Thanks to Roy, @SGBARRACUDA. Not sure whether its clocked correctly, back line on hex end vertical.
Still gotta wrestle the boot onto the crossmember.
Thanks all
After doing some reading it looks like the L and R go to the rear. I took LCA right off to put tbar in to rear socket from front. Then reinstalled LCA. Combo of antiseize and grease in the sockets and on ends.
Torsion bar adjuster in loosely. Thanks to Roy, @SGBARRACUDA. Not sure whether its clocked correctly, back line on hex end vertical.
Still gotta wrestle the boot onto the crossmember.
Thanks all
