1973 Duster 340 Torsion Bars - recommendations

i just recently installed firm feels 1.12 on a 68 dart, they are clocked at 2 or 3 degrees which guy at firm feel told me was stock.set lower control at about 4 or 8 oclock adjuters backed off bar's slid right in. when you run the adjuster up abought 3/4 in hangin below LCA is where it comes on to the torsion bar, with the floor jack under the LCA holding it up it is now at 3 oclock. with engine in sitting on the ground that 3/4 turned up almost flush will be perfect.my guess is that 15 or 20 degrees is your problem if you think about it IT HAS TO GO SOMEWHERE.