Need some help figuring CR

Hello all,
Due to health reasons I've been unable to post or chime in since 2009. I've sold off many of my Mopar to pay for medical and related expenses...it saddened me quite a bit. But im back from the near death grips..
I'm building a date code 9/11/65 440 with 516 heads. Just got the short block and heads back from machine shop. Was a really low mileage 440 that sat in a field for 30 years. I decided to keep the stock pistons, honed the block and fresh rings and bearings.
The pistons sit .084 down in the hole, and I cc checked the heads at 78cc using a cc kit.
The heads have just been resurfaced and ill be using a 0.020 steel shim head gasket.
My question is...would it be safe to say, that I'll be right around stock compression? And I believe stock CR was 9.5.1..please correct me if I'm wrong. MAN It's good to be back and working on a Mopar AGAIN...Thank you guys and gals!