Many of us opted to swap spindles side for side which puts the calipers on the rear of the spindle. If you have thoughts of an anti-sway bar this might be a good idea, as some adaptations/ swaps or aftermarket bars don't play well with front mount brakes
But this results in brake hoses which don't fit "factory." Many of us used Volare hoses, but someone on here came up with Camaro hoses fit better.
These are Volare/ Aspen hoses which are a bit long
Front disc conversion soft lines
And a thread about hoses
Brake hoses?
rear mounted caliper
View attachment 1715775635