Megasquirt EFI Lean Cruise Reality Check

You an also get a "am I on the right track" feel for this by doing the following:

Without changing anything in the dist or timing, make sure you know what your full advance MS timing is, and get those figures in mind.

Then simply set up the engine to fire on NO1 with the marks stopped on whatever that figure is, such as 35BTC etc. If you don't have the balancer marked, you can just measure it out mathematically, IE balancer is so big around, so many degrees per inch, etc

Now with balancer stopped at total electronic/ MS advance, remove cap and carefully see where the rotor is stopped in relation to no1 tower