Solid lifter input

the later lifters on that break had a 3/8 ball seat while the older ones had a 5/16 seat iirc.

512Stroker said

I have seen that some solid lifters providers state that they have moved the oiling band down to avoid the band being exposed.

Click to expand...

Thats probably a misconception that the bands get exposed on high lift cams. they should move the band up so it doesnt get dropped out the bottom! And Why the heck are the banding solid lifters anyway? There is no oil hole to unshroud....? Stupid lifter companies...what do they know ? Pshhh....


take a straight edge across journals on a stock cam, note distance to highest lobe. now take that monster .630 lift and do the same...there is your lifter difference out the bore. not much eh? No matter the lift on a stock bearing cam, the lobes still have to fit through them!