repro console top plates

This is my second set. The first set was warped badly. The front edge of the top plate stuck up in the air about 1/2" when the back of the plate was sitting flat. The door also was warped. I talked to PG on the phone and they wanted them back to look at them. They sent out another set and I just got them today upon return from the Mopar Nats. The second set is a lot better in the warpage departement. Not perfectly flat like an original one I have here but it will be fine once it's bolted down. The chrome looks OK but the silver paint on the door was sprayed right over grinding marks. I'll probably just live with that for awhile...might eventually put a carbon fiber overlay over the silver.

The ash tray door is warped but it won't be noticeable once installed I don't think. I'll make sure to check how it fits so I don't get any scratches in it when it gets opened. I test fit it on the first set of plates I had and it was fine...it didn't come close to getting scratched.

Even though there are some quality issues, I'm happy with PG in that they took them back to look at and sent me another set. Now I just need to find the correct fasteners to make them work. The same thing with the metric screw holes happened with their leather tuff wheel. The horn mechanism screws were tapped metric.