318 to 360 Swap
I've used the B&M 10239 flexplate for this swap (keeping the internally balanced torque converter) & it works fine. there are 2 360 "center sump" pans that I am aware of (might be others), a 392 & the sump starts 4" back from a plumb line down from the front lip of the pan & an 876 pan & that dimention is 2" & the 392 will clear the rear edge of the kmember & the 876 may likely as well but no exp with it. the 876 pan requires the bottom curved pickup & the 392 pan requires the right angle (middle) one. disregard the top pickup. when the time comes I would compare the 318 one to those shown as you might be OK as is.
I've used the B&M 10239 flexplate for this swap (keeping the internally balanced torque converter) & it works fine. there are 2 360 "center sump" pans that I am aware of (might be others), a 392 & the sump starts 4" back from a plumb line down from the front lip of the pan & an 876 pan & that dimention is 2" & the 392 will clear the rear edge of the kmember & the 876 may likely as well but no exp with it. the 876 pan requires the bottom curved pickup & the 392 pan requires the right angle (middle) one. disregard the top pickup. when the time comes I would compare the 318 one to those shown as you might be OK as is.
