Need A833 advice

Jim64 said

Since I have so many experts on this thread - does anyone have a set of measurements for the mopar clutch forks? I'm looking for both overall length AND the distance between the center of the throwout bearing and the pivot point.
I have two forks and two pivots, and neither combination is perfect for what I need. With the aluminum bellhousing, the 10 1/2" long fork is too short, and the longer one I have is the right length, but the pivot that goes with it leaves the end of the fork too low. (I might just need a new pivot that will fit the longer fork but move it upwards a bit.)

Click to expand...

I remember I had issues with mine when I first set it up because I bought the whole thing as in the whole setup for speed bell housing linkage and all from one guy. Actually my wife drove 3 hours up in the Seattle to get it for me on a day I had to work and even at that I wouldn't have known by sight at that point what was right and what was wrong. I ended up with some kind of funky clutch fork. What I did was win on the Brewers website. And if I ever have a real problem like that with fitment and issues I called Brewers.. but generally the Brewers website has a lot of information on details like that.. I think mine was if I had the gas 12 and 1/2 in overall length but the pivot point I'm not sure it's been too long. That's my expert opinion LOL