[WANTED] 66 ply VALIANT SIGNET SIDE TRIM MOLDINGS

-
Status
Not open for further replies.
R

roger buetow

Well-Known Member
Joined
Jun 11, 2017
Messages
94
Reaction score
54
Location
kingman az
Rating - 100%
5   0   0
Contact seller
i am looking for two sections of side trim moldings on the rear quarters for my 66 ply valiant signet, on pass side from tail light to wheel well and on the driver side from wheel well to door. THANKS in advance for your help. Take care and have a great day. Roger
 
I still have a few moldings from one, but, I would like measurements and maybe a photo of the ones you need (or a photo of the opposite side).
 
The pass. side is 20 1/2 in. long and flared on the fwd. end for the wheel well opening, the driver side is 28 3/8 in long and flared on the aft end for the wheel well. I hope you have them waiting for your reply. THANKS Roger
 
roger buetow said:
i am looking for two sections of side trim moldings on the rear quarters for my 66 ply valiant signet, on pass side from tail light to wheel well and on the driver side from wheel well to door. THANKS in advance for your help. Take care and have a great day. Roger
Click to expand...
Any Mopar part numbers??
 
roger buetow said:
i am looking for two sections of side trim moldings on the rear quarters for my 66 ply valiant signet, on pass side from tail light to wheel well and on the driver side from wheel well to door. THANKS in advance for your help. Take care and have a great day. Roger
Click to expand...
Going thru all my molding can’t find 66 but I will keep and eye out for u.
 
Hard to find. I will keep an eye out also and I have some pics that may help.
i am looking for pics of what you need.
07DDC800-885E-4840-AA24-83F37A3FA938.jpeg
8AED7894-B860-4D7F-8FAF-6F49FA6EF89E.jpeg
556FB095-8B31-4A01-82F6-3B2ECF9E9303.jpeg
E22E271B-A1F6-442E-BF96-071DFABB1033.jpeg
D35D3082-3940-4F5E-B427-915899E60820.jpeg
 
Thanks for your interest in my project, the trim items I need are for a 66 valiant signet on the pass side tail light to wheel well ( part no 2585114 ) and on the driver side rear fender well to door ( part no 2585873 ). I also need the rear windshield seal if you have or run across one. Big problem with the 66 signet to find do to small amount produced and one year only items. THANKS again for your interest and help. Roger B
 
Status
Not open for further replies.
-

Back
Top