Installing mopar Electronic distributor

Daves69 said
I don't know if this helps ya' but FWIW,
This is part of what came with my distributor kit. It's worked just fine since maybe '86 or so with my '69 stock harness. I am not currently running the 534 chrome box, coil, ballast set, but a "real" Mopar orange with appropriate coil and ballast. I also run the 732 VR.
When checking for keyed power, both connections on the ballast need to be removed.
In key "start" you should have power to Ign2 connector ONLY, nothing on the other.
In key "run" you should have power to Ign1 connector ONLY, nothing on the other.

View attachment 1715786277
View attachment 1715786279
View attachment 1715786281
View attachment 1715786283

Thanks, thats how it set up now.
12v with key on at #2
And at run nothing only to #1
I originally ran it with the orig Harness 5 wire installed and it ran for about 1/2 hour total time over 2 days then died dead.
apparently somthing blew out. trying coil today but i suspect the box may have went.
I just called mopar performance the maker of the setup and he is sending a new orange box He seems to think I got a bad one