Mopowers' 66 Dart Build
I figured I’d give the tops of the pistons a good cleaning before bolting down the heads. Damn slugs are about 0.120” in the hole at TDC to net a whopping ~7.5:1 SCR. I may as well just mount up a Briggs and Stratton pull cord to the balancer to start this pig. After bolting up the heads, I started mocking up an old alternator I had to make some brackets and decided to just cheat and pick up some brackets from AREngineering and use a 90 amp Toyota Denso alternator.
I figured I’d give the tops of the pistons a good cleaning before bolting down the heads. Damn slugs are about 0.120” in the hole at TDC to net a whopping ~7.5:1 SCR. I may as well just mount up a Briggs and Stratton pull cord to the balancer to start this pig. After bolting up the heads, I started mocking up an old alternator I had to make some brackets and decided to just cheat and pick up some brackets from AREngineering and use a 90 amp Toyota Denso alternator.
