Need some advice on some cylinder head gaskets

But with 10 to 15 pounds of boost I’d see if I could search to the ends of the internet and find the right side match to this gasket. SCE claims you don’t have to O ring to run them with the rubber coating and neoprene seals around the coolant, but they advise o rings with power adders. Since you’ll have the heads off anyway, it wouldn’t be much to have them cut for receiver grooves. The 15.3 cc volume should help drop a little compression. You wouldn’t have the P/N on the pistons would you?
DODGE SCE Gaskets T690672L SCE Titan Copper Head Gaskets | Summit Racing