1966 Factory V8 Valiant Signet Restoration For My Other Daughter
Spent a few hours this afternoon... too hot out there today. We are committed now. It is lining up within 1/16", can't ask for more. The RH upper quarter piece from Michigan had the holes for the taillight in it. For some reason it does not line up well. Need to expand the clearance holes so I can rotate that taillight to be vertical. The LH will go vertical if you rotate it so that one is good.
You always will need some minor adjustments to your weld joint as you go. I needed to skim just a little off the back top to get it to fit perfect.
Spent a few hours this afternoon... too hot out there today. We are committed now. It is lining up within 1/16", can't ask for more. The RH upper quarter piece from Michigan had the holes for the taillight in it. For some reason it does not line up well. Need to expand the clearance holes so I can rotate that taillight to be vertical. The LH will go vertical if you rotate it so that one is good.
You always will need some minor adjustments to your weld joint as you go. I needed to skim just a little off the back top to get it to fit perfect.
