I have 225/50R17 on the front with 17x7 with 4.25 inch backspace. Front-end suspension is mostly aftermarket with QA tubular K-member, UCA's and Tierods. With PST torsion bars and reinforced stock LCA's with a QA1 sway-bar.
And 255/50R17 on the rear with 17x8 with 4.5 inch backspace. All stock rear.
No issues on the rear.
There is a slight momentary rubbing in the front only during turning while hitting a bump.
*On the second photo the front end looked a little high because it wasn't quite settled, it's actually slightly lower than that. Because I took this picture right after I lowered the jack.*
View attachment 1715788040
View attachment 1715788041
